Creating More Complex Container Images
Last updated on 2024-10-15 | Edit this page
In order to create and use your own container images, you may need more information than our previous example. You may want to use files from outside the container, that are not included within the container image, either by copying the files into the container image, or by making them visible within a running container from their existing location on your host system. You may also want to learn a little bit about how to install software within a running container or a container image. This episode will look at these advanced aspects of running a container or building a container image. Note that the examples will get gradually more and more complex – most day-to-day use of containers and container images can be accomplished using the first 1–2 sections on this page.
Overview
Questions
- How can I make more complex container images?
Objectives
- Explain how you can include files within Docker container images when you build them.
- Explain how you can access files on the Docker host from your Docker containers.
Using scripts and files from outside the container
In your shell, change to the sum folder in the
docker-intro folder and look at the files inside.
This folder has both a Dockerfile and a Python script
called sum.py. Let’s say we wanted to try running the
script using a container based on our recently created
alpine-python container image.
Running containers
What command would we use to run Python from the
alpine-python container?
If we try running the container and Python script, what happens?
OUTPUT
python3: can't open file 'sum.py': [Errno 2] No such file or directoryNo such file or directory
What does the error message mean? Why might the Python inside the container not be able to find or open our script?
The problem here is that the container and its filesystem is separate from our host computer’s filesystem. When the container runs, it can’t see anything outside itself, including any of the files on our computer. In order to use Python (inside the container) and our script (outside the container, on our host computer), we need to create a link between the directory on our computer and the container.
This link is called a “mount” and is what happens automatically when a USB drive or other external hard drive gets connected to a computer – you can see the contents appear as if they were on your computer.
We can create a mount between our computer and the running container
by using an additional option to docker container run.
We’ll also use the variable ${PWD} which will substitute in
our current working directory. The option will look like this
--mount type=bind,source=${PWD},target=/temp
What this means is: make my current working directory (on the host
computer) – the source – visible within the container that is
about to be started, and inside this container, name the directory
/temp – the target.
Types of mounts
You will notice that we set the mount type=bind, there
are other types of mount that can be used in Docker
(e.g. volume and tmpfs). We do not cover other
types of mounts or the differences between these mount types in the
course as it is more of an advanced topic. You can find more information
on the different mount types in the Docker
documentation.
Let’s try running the command now:
BASH
$ docker container run --mount type=bind,source=${PWD},target=/temp alice/alpine-python python3 sum.pyBut we get the same error!
OUTPUT
python3: can't open file 'sum.py': [Errno 2] No such file or directoryThis final piece is a bit tricky – we really have to remember to put
ourselves inside the container. Where is the sum.py file?
It’s in the directory that’s been mapped to /temp – so we
need to include that in the path to the script. This command should give
us what we need:
BASH
$ docker container run --mount type=bind,source=${PWD},target=/temp alice/alpine-python python3 /temp/sum.pyNote that if we create any files in the /temp directory
while the container is running, these files will appear on our host
filesystem in the original directory and will stay there even when the
container stops.
Other Commonly Used Docker Run Flags
Docker run has many other useful flags to alter its function. A
couple that are commonly used include -w and
-u.
The --workdir/-w flag sets the working
directory a.k.a. runs the command being executed inside the directory
specified. For example, the following code would run the
pwd command in a container started from the latest ubuntu
image in the /home/alice directory and print
/home/alice. If the directory doesn’t exist in the image it
will create it.
docker container run -w /home/alice/ ubuntu pwdThe --user/-u flag lets you specify the
username you would like to run the container as. This is helpful if
you’d like to write files to a mounted folder and not write them as
root but rather your own user identity and group. A common
example of the -u flag is
--user $(id -u):$(id -g) which will fetch the current
user’s ID and group and run the container as that user.
Exercise: Explore the script
What happens if you use the docker container run command
above and put numbers after the script name?
This script comes from the Python Wiki and is set to add all numbers that are passed to it as arguments.
Exercise: Checking the options
Our Docker command has gotten much longer! Can you go through each piece of the Docker command above and explain what it does? How would you characterize the key components of a Docker command?
Here’s a breakdown of each piece of the command above
-
docker container run: use Docker to run a container -
--mount type=bind,source=${PWD},target=/temp: connect my current working directory (${PWD}) as a folder inside the container called/temp -
alice/alpine-python: name of the container image to use to run the container -
python3 /temp/sum.py: what commands to run in the container
More generally, every Docker command will have the form:
docker [action] [docker options] [docker container image] [command to run inside]
Exercise: Interactive jobs
Try using the directory mount option but run the container interactively. Can you find the folder that’s connected to your host computer? What’s inside?
The docker command to run the container interactively is:
Once inside, you should be able to navigate to the /temp
folder and see that’s contents are the same as the files on your host
computer:
Mounting a directory can be very useful when you want to run the software inside your container on many different input files. In other situations, you may want to save or archive an authoritative version of your data by adding it to the container image permanently. That’s what we will cover next.
Including your scripts and data within a container image
Our next project will be to add our own files to a container image –
something you might want to do if you’re sharing a finished analysis or
just want to have an archived copy of your entire analysis including the
data. Let’s assume that we’ve finished with our sum.py
script and want to add it to the container image itself.
In your shell, you should still be in the sum folder in
the docker-intro folder.
Let’s add a new line to the Dockerfile we’ve been using
so far to create a copy of sum.py. We can do so by using
the COPY keyword.
COPY sum.py /homeThis line will cause Docker to copy the file from your computer into the container’s filesystem. Let’s build the container image like before, but give it a different name:
The Importance of Command Order in a Dockerfile
When you run docker build it executes the build in the
order specified in the Dockerfile. This order is important
for rebuilding and you typically will want to put your RUN
commands before your COPY commands.
Docker builds the layers of commands in order. This becomes important
when you need to rebuild container images. If you change layers later in
the Dockerfile and rebuild the container image, Docker
doesn’t need to rebuild the earlier layers but will instead used a
stored (called “cached”) version of those layers.
For example, in an instance where you wanted to copy
multiply.py into the container image instead of
sum.py. If the COPY line came before the
RUN line, it would need to rebuild the whole image. If the
COPY line came second then it would use the cached
RUN layer from the previous build and then only rebuild the
COPY layer.
Exercise: Did it work?
Can you remember how to run a container interactively? Try that with this one. Once inside, try running the Python script.
This COPY keyword can be used to place your own scripts
or own data into a container image that you want to publish or use as a
record. Note that it’s not necessarily a good idea to put your scripts
inside the container image if you’re constantly changing or editing
them. Then, referencing the scripts from outside the container is a good
idea, as we did in the previous section. You also want to think
carefully about size – if you run docker image ls you’ll
see the size of each container image all the way on the right of the
screen. The bigger your container image becomes, the harder it will be
to easily download.
Callout
## Security warning Login credentials including passwords, tokens, secure access tokens or other secrets must never be stored in a container. If secrets are stored, they are at high risk to be found and exploited when made public.
Copying alternatives
Another trick for getting your own files into a container image is by
using the RUN keyword and downloading the files from the
internet. For example, if your code is in a GitHub repository, you could
include this statement in your Dockerfile to download the latest version
every time you build the container image:
RUN git clone https://github.com/alice/mycodeSimilarly, the wget command can be used to download any
file publicly available on the internet:
RUN wget ftp://ftp.ncbi.nlm.nih.gov/blast/executables/blast+/2.10.0/ncbi-blast-2.10.0+-x64-linux.tar.gzNote that the above RUN examples depend on commands
(git and wget respectively) that must be
available within your container: Linux distributions such as Alpine may
require you to install such commands before using them within
RUN statements.
More fancy Dockerfile options (optional, for
presentation or as exercises)
We can expand on the example above to make our container image even more “automatic”. Here are some ideas:
Make the sum.py script run automatically
FROM alpine
RUN apk add --update python3 py3-pip python3-dev
COPY sum.py /home
# Run the sum.py script as the default command
CMD ["python3", "/home/sum.py"]Build and test it:
You’ll notice that you can run the container without arguments just
fine, resulting in sum = 0, but this is boring. Supplying
arguments however doesn’t work:
results in
OUTPUT
docker: Error response from daemon: OCI runtime create failed:
container_linux.go:349: starting container process caused "exec:
\"10\": executable file not found in $PATH": unknown.This is because the arguments 10 11 12 are interpreted
as a command that replaces the default command given by
CMD ["python3", "/home/sum.py"] in the image.
To achieve the goal of having a command that always runs
when a container is run from the container image and can be
passed the arguments given on the command line, use the keyword
ENTRYPOINT in the Dockerfile.
FROM alpine
COPY sum.py /home
RUN apk add --update python3 py3-pip python3-dev
# Run the sum.py script as the default command and
# allow people to enter arguments for it
ENTRYPOINT ["python3", "/home/sum.py"]
# Give default arguments, in case none are supplied on
# the command-line
CMD ["10", "11"]Build and test it:
BASH
$ docker image build -t alpine-sum:v2 .
# Most of the time you are interested in the sum of 10 and 11:
$ docker container run alpine-sum:v2
# Sometimes you have more challenging calculations to do:
$ docker container run alpine-sum:v2 12 13 14Overriding the ENTRYPOINT
Sometimes you don’t want to run the image’s ENTRYPOINT.
For example if you have a specialized container image that does only
sums, but you need an interactive shell to examine the container:
will yield
OUTPUT
Please supply integer argumentsYou need to override the ENTRYPOINT statement in the
container image like so:
Add the sum.py script to the PATH so you
can run it directly:
FROM alpine
RUN apk add --update python3 py3-pip python3-dev
COPY sum.py /home
# set script permissions
RUN chmod +x /home/sum.py
# add /home folder to the PATH
ENV PATH /home:$PATHBuild and test it:
Best practices for writing Dockerfiles
Take a look at Nüst et al.’s “Ten simple rules
for writing Dockerfiles for reproducible data science” [1] for
some great examples of best practices to use when writing Dockerfiles.
The GitHub
repository associated with the paper also has a set of example
Dockerfiles demonstrating how the rules highlighted by
the paper can be applied.
[1] Nüst D, Sochat V, Marwick B, Eglen SJ, Head T, et al. (2020) Ten simple rules for writing Dockerfiles for reproducible data science. PLOS Computational Biology 16(11): e1008316. https://doi.org/10.1371/journal.pcbi.1008316
Key Points
- Docker allows containers to read and write files from the Docker host.
- You can include files from your Docker host into your Docker
container images by using the
COPYinstruction in yourDockerfile.